Cisco C9300-24T-E V02 16.09.03 24-Port Switch C9300-NM-8X Dual Power 初期化済み
switch: boot
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf
#
##################################################################################################################################################################################################################################################################################################################################################
Feb 3 05:55:35.840: %PMAN-5-EXITACTION: C0/0: pvp: Process manager is exiting:
Both links down, not waiting for other switches
Switch number is 1
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Wed 20-Mar-19 08:02 by mcpre
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.
Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.
You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.
FIPS: Flash Key Check : Key Not Found, FIPS Mode Not Enabled
cisco C9300-24T (X86) processor with 1419496K/6147K bytes of memory.
Processor board ID FOC2320U12C
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : 6c:5e:3b:66:c0:00
Motherboard Assembly Number : 73-18270-03
Motherboard Serial Number : FOC23202ZX6
Model Revision Number : A0
Motherboard Revision Number : A0
Model Number : C9300-24T
System Serial Number : FOC2320U12C
%INIT: waited 0 seconds for NVRAM to be available
Press RETURN to get started!
*Feb 3 05:55:58.897: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Feb 3 05:55:59.353: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Feb 3 05:55:59.353: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled
*Feb 3 05:55:59.353: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Feb 3 05:56:02.896: %CRYPTO-4-AUDITWARN: Encryption audit check could not be performed
*Feb 3 05:56:02.927: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Feb 3 05:56:03.090: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up
*Feb 3 05:56:03.091: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up
*Feb 3 05:56:03.188: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changed to Active.
*Feb 3 05:56:03.584: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Feb 3 05:56:04.100: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up
*Feb 3 05:56:04.100: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1, changed state to up
*Feb 3 05:55:35.829: %PMAN-5-EXITACTION: Switch 1 R0/0: pvp: Process manager is exiting:
*Feb 3 05:55:47.576: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable
*Feb 3 05:55:47.576: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down
*Feb 3 05:55:47.576: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable
*Feb 3 05:55:47.576: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Feb 3 05:55:47.576: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Feb 3 05:55:47.576: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Feb 3 05:55:47.576: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
*Feb 3 05:56:04.387: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Feb 3 05:56:04.387: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up
*Feb 3 05:56:04.414: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Feb 3 05:56:04.448: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Feb 3 05:56:04.768: %SYS-5-CONFIG_I: Configured from memory by console
*Feb 3 05:56:05.037: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Wed 20-Mar-19 08:02 by mcpre
*Feb 3 05:56:05.093: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!
*Feb 3 05:56:05.095: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Feb 3 05:56:05.373: %SYS-6-BOOTTIME: Time taken to reboot after reload = 239 seconds
*Feb 3 05:56:05.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Feb 3 05:56:05.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2, changed state to up
*Feb 3 05:56:06.889: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:06.889: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:06.889: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down
*Feb 3 05:56:06.889: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down
*Feb 3 05:56:06.889: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:06.890: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:06.891: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down
*Feb 3 05:56:06.891: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down
*Feb 3 05:56:06.891: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/5, changed state to down
*Feb 3 05:56:06.891: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/6, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/7, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/8, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface FortyGigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface FortyGigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/1/1, changed state to down
*Feb 3 05:56:06.892: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/1/2, changed state to down
*Feb 3 05:56:07.035: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Feb 3 05:56:07.888: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:07.889: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:07.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down
*Feb 3 05:56:07.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down
*Feb 3 05:56:07.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:07.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:07.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down
*Feb 3 05:56:07.891: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/5, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/6, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/7, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/8, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface FortyGigabitEthernet1/1/1, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface FortyGigabitEthernet1/1/2, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/1/1, changed state to down
*Feb 3 05:56:07.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/1/2, changed state to down
*Feb 3 05:56:10.225: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)
CRYPTO_PKI: setting trustpoint policy TP-self-signed-1421256971 to use keypair TP-self-signed-1421256971% Generating 2048 bit RSA keys, keys will be non-exportable...
*Feb 3 05:56:22.924: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
[OK] (elapsed time was 1 seconds)
*Feb 3 05:56:22.965: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi
*Feb 3 05:56:22.984: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Feb 3 05:56:23.367: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-1421256971 has been generated or imported by crypto-engine
*Feb 3 05:56:23.368: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Feb 3 05:56:23.409: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Feb 3 05:56:23.473: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-1421256971.server has been generated or imported by crypto-engine
*Feb 3 05:56:28.263: %PLATFORM_PM-6-FRULINK_INSERTED: 8x10G uplink module inserted in the switch 1 slot 1[OK]
*Feb 3 05:56:36.039: %PKI-6-CONFIGAUTOSAVE: Running configuration saved to NVRAM
*Feb 3 05:56:36.425: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Feb 3 05:56:36.425: %SMART_LIC-5-COMM_RESTORED: Communications with the Cisco Smart Software Manager or satellite restored
Switch>en
Switch#show version
Cisco IOS XE Software, Version 16.09.03
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Wed 20-Mar-19 08:02 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.9.1r [FC2], RELEASE SOFTWARE (P)
Switch uptime is 1 minute
Uptime for this control processor is 2 minutes
System returned to ROM by Reload Command
System image file is "flash:packages.conf"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
dna-essentials Subscription Smart License dna-essentials
Smart Licensing Status: UNREGISTERED/EVAL EXPIRED
cisco C9300-24T (X86) processor with 1419496K/6147K bytes of memory.
Processor board ID FOC2320U12C
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2 TwentyFive Gigabit Ethernet interfaces
2 Forty Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.
Base Ethernet MAC Address : 6c:5e:3b:66:c0:00
Motherboard Assembly Number : 73-18270-03
Motherboard Serial Number : FOC23202ZX6
Model Revision Number : A0
Motherboard Revision Number : A0
Model Number : C9300-24T
System Serial Number : FOC2320U12C
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 40 C9300-24T 16.9.3 CAT9K_IOSXE INSTALL
Configuration register is 0x102
Switch#
;)
